PLANET IP30 Industrial L2+/L4 8-Port Managed L2+ Gigabit Ethernet (10/

Advanced Manageable PoE Solution for Hardened EnvironmentPLANET IGS-5225-8P2T4S PoE L2+Industrial Managed PoE+ Switch. featuring 8 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts. two 10/100/1000BASE-T ports. two 100/1000 BASE-X SFP ports and two 100/1000/2500 BASE-X SFP ports in an IP30 rugged metal case. can be installed in any difficult environment. It provides user-friendly yet advanced IPv6/IPv4 management interfaces. abundantL2/L4 switching functions. Layer 3 static routing capability. and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably. stably and quietly in the temperature range from -40 to 75 degrees C.Redundant Ring. Fast Recovery for Critical Network ApplicationsThe IGS-5225-8P2T4S supports redundant ring technology and features strong. rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology. Spanning Tree Protocol (802.1s MSTP). and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network. the recovery time of data link can be as fast as 10ms.High Power PoE for Security and Public Service ApplicationsAs the whole system comes with a total 240-watt PoE budget. the IGS-5225-8P2T4S is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11n/ac/ax) wireless LAN access points. PTZ (pan. tilt. zoom) speed dome network cameras and other PoE network devices.Intelligent Alive Check for Powered DeviceThe IGS-5225-8P2T4S can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding. the IGS-5225-8P2T4S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power. thus reducing administrator’s management burden.PoE Schedule for Energy SavingsUnder the trend of energy saving worldwide and contributing to environmental protection on the Earth. the IGS-5225-8P2T4S can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.Scheduled Power RecyclingThe IGS-5225-8P2T4S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore. it will reduce the chance of IP camera or AP crash resulting from buffer overflow.SMTP/SNMP Trap Event AlertThe IGS-5225-8P2T4S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection. or the rebooting response.Effective Alarm Alert for Better ProtectionThe IGS-5225-8P2T4S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature. the users would not have to waste time finding where the problem is. It will help to save time and human resource.Digital Input and Digital Output for External AlarmThe IGS-5225-8P2T4S supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector). and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-5225-8P2T4S port shows link down. link up or power failure.Convenient and Smart ONVIF Devices with Detection FeaturePLANET has developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-5225-8P2T4S GUI. clients just need one click to search and show all of the ONVIF devices via network application. In addition. clients can upload floor images to the switch series making the deployments of surveillance and other devices easy for planning and inspection purposes. Moreover. clients can get real-time surveillance’s information and online/offline status; the PoE reboot can be controlled from the GUI.Robust Layer 2 FeaturesThe IGS-5225-8P2T4S can be programmed for advanced switch management functions such as dynamic port link aggregation. Q-in-Q VLAN. private VLAN. Rapid Spanning Tree Protocol. Layer 2 to Layer 4 QoS. bandwidth control and IGMP snooping. The IGS-5225-8P2T4S provides 802.1Q tagged VLAN. and the VLAN groups allowed will be maximally up to 4K. Via aggregation of supporting ports. the IGS-5225-8P2T4S allows the operation of a high-speed trunk combining multiple ports. I