DrayTek G1282 Managed Gigabit Ethernet (10/100/1000) 1U Black

Manage Centrally or Stand-Alone. Automatic VLAN Assignment. Useful Security Features. IP Camera Management. 4 SFP Ports for Uplinks. Rack Mountable & Silent. VigorSwitch G1282. Smart Managed Gigabit Switch with 24 Gigabit Ports & 4 SFP Ports. The VigorSwitch G1282 is a high-performance, Smart Managed Gigabit Ethernet switch. With 24 RJ-45 Gigabit LAN ports, it's ideal for adding network ports to a DrayTek Vigor router, implementing complex networks with VLANs and adding port-level security with the switch's Access Control List.. Designed for centralised management, the VigorSwitch G1282 can be provisioned and monitored with the VigorACS management platform, the free VigorConnect single site management system and/or, with a DrayTek Vigor router’s Central Switch Management. Easily provision VLAN configuration through the router and clone switch configurations. Drastically reduce the setup time required for a complex network and configure an entire DrayTek network remotely.. Manage Centrally or Stand-Alone. Configure and monitor the switch through the VigorACS cloud management platform, through VigorConnect, through a DrayTek Vigor router, or directly via the device's Web Interface.. Automatic VLAN Assignment. Voice, Surveillance and MAC VLANs dynamically assign VLANs to IP Phones, IP Cameras and more. Ensures the same network setup and Quality of Service regardless of where devices are plugged in.. Useful Security Features. Protect your network against unauthorised access and network problems with IP Conflict Prevention, DoS Defence, Access Control Lists for IPv4, IPv6, MAC and IP Source Guard.. IP Camera Management. Manage IP Cameras easily with detection and management of ONVIF cameras. Use PoE Device Check, auto-generated IP Camera topology and Camera Snapshots to detect & troubleshoot problems.. 4 SFP Ports for Uplinks. Uplink to Fibre or direct-attach to additional switches, with 4x Gigabit SFP Ports. Connect switches over long distances with SFP Fibre modules.. Rack Mountable & Silent. Fit the VigorSwitch G1282 with the included rack mounting kit into any standard 19” rack.. The switch is fanless and silent, ideal for use in a quiet office environment.. Management features. ARP inspection. Yes. Configuring Location Settings (CLI). Yes. Web-based management. Yes. Cloud-managed. Yes. Quality of Service (QoS) support. Yes. Switch type. Managed. Ports & interfaces. Combo SFP ports quantity. 4. Basic switching RJ-45 Ethernet ports type. Gigabit Ethernet (10/100/1000). Basic switching RJ-45 Ethernet ports quantity. 24. Network. Virtual LAN features. MAC address-based VLAN, Port-based VLAN, Voice VLAN. VLAN support. Yes. MAC address auto-learning supported. Yes. Ethernet LAN data rates. 1000 Mbit/s. Spanning tree protocol. Yes. Port mirroring. Yes. Copper ethernet cabling technology. 10BASE-T, 100BASE-T, 1000BASE-T. 10G support. No. Networking standards. IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x. Data transmission. Packet buffer memory. 4.1 MB. Jumbo frames. 9000. Jumbo frames support. Yes. Forwarding rate. 41.7 Mpps. Switching capacity. 56 Gbit/s. MAC address table. 8000 entries. Security. IGMP snooping. Yes. Access Control List (ACL). Yes. DHCP features. DHCP client. Multicast features. Multicast support. Yes. Design. Reset button. Yes. Product colour. Black. Form factor. 1U. Rack mounting. Yes. Performance. Fanless. No. Power. Power consumption (max). 36 W. AC input voltage. 100 - 240 V. Power supply included. Yes. Power source. AC. Power over Ethernet (PoE). Power over Ethernet (PoE). No. Operational conditions. Operating relative humidity (H-H). 10 - 90%. Storage temperature (T-T). -20 - 70 °C. Operating temperature (T-T). 0 - 50 °C. Weight & dimensions. Weight. 2.8 kg. Height. 44 mm. Depth. 206 mm. Width. 441 mm. Packaging content. Rack mount kit. Yes. Quick start guide. Yes. Cables included. LAN (RJ-45). leaflet