Blackmagic Design 2110 IP SDI to HDMI 12G-10

SMPTE-2110 IP video product - SDI to HDMI 12G-10Blackmagic Design has a wide range of SMPTE-2110 IP video products including standards converters video monitors audio monitors and even cameras. Plus they support Ultra HD using low cost 10G Ethernet. Most converter models are bidirectional so they're fantastic to use on cameras when you need an extra program return. The rack mount models have an elegant design with a colour LCD for monitoring menus and diagnostics. All models conform to the SMPTE-2110 standard for IP video including PTP clocks and even NMOS support so you can make connections using a video router panel. The Blackmagic 2110 IP Converter 3x3G model even includes a reference video output timed to the 2110 PTP clock.Build Professional SMPTE-2110 Broadcast SystemsThe Blackmagic 2110 IP Converters have been designed to integrate SDI equipment into 2110 IP broadcast systems. The rack mount models can be installed in equipment racks right next to the equipment you're converting. However with Blackmagic Studio Cameras Blackmagic Audio Monitor 12G G3 and the SmartView 4K G3 you can build most of your SMPTE-2110 system without converters. Plus most Blackmagic SMPTE-2110 IP video products can be remote powered. Adding converters also means you get a low cost way to transform all your video equipment to SMPTE-2110. Simply add a Blackmagic 2110 IP Converter to live production switchers disk recorders streaming processors cameras TVs and more.Conforms to the SMPTE-2110 IP Video StandardBlackmagic 2110 IP products conform to the SMPTE-2110 standard for IP video which specifies the transport synchronization and description of 10-bit video audio and ancillary data over managed IP networks for broadcast. It can also re-sync SDI inputs to a common PTP clock or external gear can lock to the reference output that’s also generated from the PTP clock. Blackmagic 2110 IP products support SMPTE-2110-20 uncompressed video SMPTE-2110-21 traffic shaping/timing SMPTE-2110-30 audio and SMPTE-2110-40 for ancillary data. Plus Blackmagic 2110 IP products support multicast which is an efficient way of distributing video audio and data from a single source to multiple destinations.Multi-Rate 12G SDI for HD and Ultra HDBlackmagic 2110 IP video products designed for advanced television production also feature the latest 12G-SDI video connections. This means you can connect to traditional broadcast gear using SDI and new 2110 IP based broadcast systems with the same product. 12G-SDI is multi-rate which means that a single video BNC cable can connect to any HD or Ultra HD equipment. You get support for 720p HD at both 720p50 and 59.94p. Plus 1080i HD interlaced standards in 1080i50 and 1080i59.94. 1080p support includes 1080p at 23.98 24 25 29.97 30 50 59.94 and 60p. The 12G-SDI also handles Ultra HD in all television standards including 2160p at 23.98 24 25 29.97 50 59.94 and 60p.Uses Simple 10G Ethernet for Low CostBlackmagic 2110 IP Converters are available in models with RJ-45 connectors for simple Cat6 copper cables or SFP sockets for optical fiber modules and cables. Using simple Cat6 copper cables means you can build SMPTE-2110 systems at a dramatically lower cost. The cables are simple and Ethernet switches for 10G Ethernet are very common. In most cases modern buildings already have 10G Ethernet cable installed so you can use the cables you already have. Plus copper cables can remote power devices such as converters and cameras. There are also models for optical fiber Ethernet. Optical fiber at 10G speed is much lower cost than 25G or 40G Ethernet. You can even use 3G 6G or 12G?SDI SFP modules.Incredibly Easy to InstallOne of the biggest problems with SMPTE-2110 is needing an IT tech on standby to keep video systems running. Blackmagic 2110 IP converters solve this problem because they can connect point to point so you don't need to use a complex Ethernet switch if you don't want to. That means you get the advantage of SMPTE-2110 IP video with simple Ethernet cables remote power and bidirectional video. It’s just like an SDI workflow. You can plug cameras into rack converters and get all the camera control program video power and tally with a single cable. Or connect an HDMI converter to a rack converter for remote monitors. Everything automatically configures and just works.Simple Point to PointYou can connect the converters point to point with a simple Ethernet cable between the converters. An example is between a rack and a monitor converter or camera. The point to point connection auto configures so you don't need to enter any settings. It's a simple cable that you just plug in. With point to point connections you get the perfect solution for live events as the Ethernet cable can make connecting to cameras extremely simple with all control power and video down a single cable.Connect via Ethernet SwitchWhen working in larger SMPTE-2110 systems such as broadcast you can connect